How do I properly mount / install my Transponder ?

Instructions for proper installation and a mounting template are provided with your transponder. It is important that you follow these mounting instructions.

Step 1: Clean the area of the windshield where the transponder will be mounted. If you do not have the alcohol pad, you can use standard rubbing alcohol and a cotton pad to clean the area.

Step 2: Peel off the paper from the back of the velcro tab on your transponder.

Step 3: Position your transponder on the inside of the windshield, behind the mirror. It is best to mount your transponder in the centre of the windshield where the rear-view mirror hides it from view.

The transponder must be mounted at least one inch in from the edge of the windshield and two inches from the antenna of a remote car starter. See diagram below.

For commercial vehicles (windshield is split in the middle), place your transponder to the right of the split in the lower middle of the windshield. See diagram below.

Passenger Vehicle     Commercial Vehicle


Step 4: Press your transponder firmly against the glass.